Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: FWLROD help  (Read 2955 times)

idbl_fanatic

  • Hero Member
  • *****
  • Helpful Post Rating: 1
  • Posts: 188
FWLROD help
« on: October 11, 2008, 08:44:32 PM »
I just got my FWLROD, and I am trying to program it to my system, but not having any luck. I want to use it on channel 13, so I plug it in, and within 30 seconds, I push my remote (channel 13) and hold it for at LEAST 10 seconds, and nothing

Anyone ever programed one of these before?

Thanks
Logged

idbl_fanatic

  • Hero Member
  • *****
  • Helpful Post Rating: 1
  • Posts: 188
Re: FWLROD help
« Reply #1 on: October 11, 2008, 09:19:35 PM »
GOT IT!!!

Plug the FWLROD into the outlet, and within a few seconds, transmit the X10 address plus an ON signal several times (like rapid fire.. A1+ON, A1+ON, A1+ON, A1+ON, A1+ON, A1+ON)
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: FWLROD help
« Reply #2 on: October 11, 2008, 10:32:02 PM »
Quote from: idbl_fanatic on October 11, 2008, 09:19:35 PM
..........(like rapid fire.. A1+ON, A1+ON, A1+ON, A1+ON, A1+ON, A1+ON)

3 times should be plenty.... make sure the device(?) is close to whatever is sending the signal so it is nice and strong.
Logged
Home Automation is an always changing technology

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: FWLROD help
« Reply #3 on: October 12, 2008, 06:31:55 AM »
Yes just like a Socket Rocket. Power on and within 30 seconds send the Address and On signal at least 3 time.
Only thing that can mess up programming either the FWLROD or Socket Rocket is a Motion Sensor tripping while you are trying to program them.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.