Please login or register.

Login with username, password and session length

Author Topic: MT12A Timer Blinking after setting  (Read 2624 times)

tomminny

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
MT12A Timer Blinking after setting
« on: October 25, 2009, 11:41:55 AM »

Hi,
I have a MT12A Timer that isn't working right.  When I set the time it works for a bit then starts blinking.  Anyone have any ideas why it is doing this?  Is it toast?

Thanks!
Tom
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: MT12A Timer Blinking after setting
« Reply #1 on: October 25, 2009, 12:41:42 PM »

Do you have any backup batteries in it? Should not make a difference if there was no power blips.
If it does it with batteries in it to eliminate power blips. Then it does sound like it maybe defective.
If memory serves me that model has an external supply. You may want to double check the connector is firmly in the MT12A from the wall wart.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.