Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[gene]

Lamp mod set with dusk on, dim to %. slider
part of control now shows %of dim correct.
Entire fader area STILL shows BLUE instead
of gray for above the slider.    Win98se

[X10 Pro]

Thanks for the info. We'll take a look.

[rob]

Looks to me that all my "dusk on, dim to's"
now show up at 50% dimmed on the slider
(with the blue background that Gene
mentioned). Additionally, I get a big "?"
question mark as the dim percentage for
those lamps. (this is 3.170)

[X10 Pro]

You're seeing this in the room display when
the timers execute, right? Does it happen
when you open ActiveHome Pro after the timer
has already run? I don't think this is
related to dusk/dawn. Instead, I think this
is a part of the way the interface tracks
data when it's not communicating to the computer.

If a timer runs from the interface memory
while not communicating with the PC, the
CM15A doesn't track the exact dim level. It
just tracks that a dim has occurred. When it
communicates with the PC again it just
reports that the module has been dimmed.
ActiveHome Pro displays the blue dim marker
and the question marks in this case.

[gene]

Ok, thats when I'm getting it, after the
timer has executed then I am turning the
computer on and launching ahp.

[Noam]

I had an "issue" yesterday with AHP not
loading the module status when I opened the
software (yes, it was connected to the CM15A
before I opened the software, etc). I
checked the status report, and it showed the
correct status for those modules.However,
the GUI didn't. I coled and re-opened AHP
(no reboot or anything, just closed the
software and opened it right back up), and
the status was correct.
A bug perhaps?