Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[john h]

Just installed ver 3.173 - Should have read
the postings first!!  Now the computer
keeps giving "USB Device Not Recognized"
when I plug the interface into the USB
port.  Active Home Pro does not "see" the
interface anymore.  I see others have
reported this.  Anyone figured out how to
fix this?

[john h]

Some progres on my own question.  Seems the
problem is not Ver 3.173.  Look at the
question by KEL on the CM15A clock problem
in the "Genersl Comments" forum.  After I
downloaded the new version of software, I
unplugged my interface for a FEW SECONDS to
plug in the USB cable to add a new timer.
Apparently the CM15A DOES NOT keep proper
time when unplugged from an outlet
(batteries were brand new).  When this
happens, the clock gets off and when you re-
connect to computer, you get "USB Device
Not Recognized"  - apparently related to
the interface clock.  After reading the
posts to KEL's question, I removed the
batteries, re-connected to computer and
everything worked as normal.  Apparently
there is a serious hardware problem with at
least some of the CM15A Interface Modules
where the clock does not run properly on
batteries.  Read the posts to KEL's
comments - Over 80 reports of timers not
working simply by moving the Interface to
another outlet - even with fresh batteries!