Please login or register.

Login with username, password and session length

Author Topic: Problems With My LM465 Lamp Module  (Read 5688 times)

blackdragon

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Problems With My LM465 Lamp Module
« on: August 29, 2006, 01:33:22 AM »

I'm having trouble with one of my 465 module( the dimmable lamp one). when it is left on too long it stops working with the remote
also my hr12a doesnt work all the time
and none of my screw in lamp modules seem to ever work

anyone else have a solution to these problems or do I just throw it all out and get a better system that I dont have to keep changing batteries every day
« Last Edit: September 02, 2006, 07:00:16 PM by TakeTheActive »
Logged

KDR

  • Hero Member
  • *****
  • Helpful Post Rating: 53
  • Posts: 758
    • Home Automation Chat
Re: problems with my activehome
« Reply #1 on: August 29, 2006, 05:28:52 AM »

I it works part of the time you may want to look at what else might be plugged in and blocking the signal. My wife just got a laptop and I found that my working system upstairs total stops working when she plugs it in upstairs to charge it. If I pull her plug everything works again. I gave her a filter to use so no matter where she plugs it in its filtered.

Check around the house and see if a power supply or something electronic is getting plugged in from time to time. We also have a Game cube that does the same thing when it gets plugged in it kills some X10 modules. This is just a start.

Please give us some more detail and I'm sure we will get you up and running.

The 465 lamp unit may be bad and shutting down when its internal electronics heats up. If you have another 465 swap it out with the other and see if the problem stays with that unit.
Logged
Note: "Guests" may read the X10 forum , but you must register to post!

When I'm online you can find me in the Home Automation Chat Room!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.