Wireless Video Sender

[jimmy4040]

I just purchased this product Wireless Video Sender. I am experiencing problems getting my cable box to work with this device.
The cable box has a coax and RCA outputs. I know both of them are live because I tested it on TV together.

As soon as I plug the sender in the RCA outputs the cable box shuts off. It doesn't come on back until I unplug it.
Any ideas?
My plasma is in the master bedroom and it is locate in a weird place. Please help provide a solution.

[Brian H]

Do you know if the RCA Jacks are Composite Video and Analog Sound?

[jimmy4040]

thx for replying brian.
I finally got the video to display on the secondary TV.
Here is the new problem. As soon as I pugged the IR cable in box I get "unusable signal." 

Any suggestions will help.


PRIMARY TV
========
BTW, in order to get my setup to work I had to disconnect all the cable.
I then use the RCA cables on the sender and plugged it into the RCA audio and video on the cable box ( I left the TV disconnected).

I then plugged the receiver in and plugged into video 3 on my seconday TV.  Once the seconday TV start working I used the coax for my primary TV.

----------------------------
Now my problem is changing channels. Please help X10 guy. My roommate is laughing at me. She said it would have been cheaper to get a second cable box. I want to get the TV on the deck working. So, she can buy me a couple of drinks free.

help techstaz!!!

[jimmy4040]

Can someone offer some assistance with the IR connect problem?[

[msandi]

I'm having some trouble with the Video Sender too.  I can get everything to work on my secondary TV using the RCA Out on the cable box, but the only way I can see anything on my primary TV is by unplugging the RCA cables from the back of the cable box.

Do I need a switch box now?

[msandi]

I figured it out!!

Everything works!  I just had the TV/VCR button pushed for my TV, so the cable wasn't showing.  It's working now!