Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: assigning color to rooms  (Read 3124 times)

RSwineh29

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
assigning color to rooms
« on: December 21, 2006, 07:16:09 PM »
I'm new user using Ver 3.204.  Trying to assign color to each room but color I have assigned is not color showing up on each module in room??
Logged

hostilejava

  • Full Member
  • ***
  • Helpful Post Rating: 2
  • Posts: 53
    • HostileJava
Re: assigning color to rooms
« Reply #1 on: December 21, 2006, 07:25:09 PM »
If I recall correctly there are two ways you can have the colors setup, you can either set it up to have modules show colors based on the group they are in.  IE all switches are the same color, all macro's the same color, all sensors the same color.  Or you can have it setup by room.  I'm not at my home pc right now so I can't verify that, but I would imagine if that's the case, the setting for that would be in the preference pane somwhere?  Make sure you have it setup to group the colors by room.
Logged

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: assigning color to rooms
« Reply #2 on: December 21, 2006, 07:40:31 PM »
Quote from: hostilejava on December 21, 2006, 07:25:09 PM
...I would imagine if that's the case, the setting for that would be in the preference pane somwhere?  Make sure you have it setup to group the colors by room.

It is in... Tools / Preferences. Select or De-select "Color Room Modules By Type".
Logged

rotorhead

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: assigning color to rooms
« Reply #3 on: December 24, 2006, 07:12:31 PM »
Despite having the correct preference set and then choosing various colors for the modules, I am not able to change any of the colors.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.