Please login or register.

Login with username, password and session length

Author Topic: Can you view 4 wireless cams at the same time?  (Read 8896 times)

ytuxedo002

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Can you view 4 wireless cams at the same time?
« on: January 24, 2007, 08:35:28 PM »

I have 2 low-light B/W cams and 2 instant on wide eye color cams.  I'm having trouble figuring out a way to view all 4 at the same time.  Anybody have any suggestions???

Thanks
Logged

ytuxedo002

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Re: Can you view 4 wireless cams at the same time?
« Reply #1 on: January 24, 2007, 08:59:30 PM »

Can this even be done??
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Can you view 4 wireless cams at the same time?
« Reply #2 on: January 24, 2007, 09:19:26 PM »

I'm having trouble figuring out a way to view all 4 at the same time.  Anybody have any suggestions???


You can use a Quad Processor. It will put four video cameras into one video output.

Logged
Home Automation is an always changing technology

ytuxedo002

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Re: Can you view 4 wireless cams at the same time?
« Reply #3 on: January 24, 2007, 10:27:36 PM »

Thats a suggestion...thanks...so by you stating this i'm guess that none of the 5 different x10 software's i bought allow you to do this??...that kinda blows.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: Can you view 4 wireless cams at the same time?
« Reply #4 on: January 25, 2007, 06:55:49 AM »

You can't run more than one at a time. The wireless signal from one will interfere with another one. That is why X10 groups them in 4s 1-4;5-8;9-12 and 13-16.  Turn on any one of them the other three automatically go off.
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Can you view 4 wireless cams at the same time?
« Reply #5 on: January 25, 2007, 07:45:06 PM »

Your right Brian H! I missed the "wireless" part (I feel dumb).

You would need to have 4 separate receivers (all set on a different code) and spread the addressable power supplies over at least two different house codes. Doesn't really sound worth it, and very likely at least one of the camera/receiver channels would have interference from something.
« Last Edit: January 25, 2007, 07:53:56 PM by Dave_x10_L »
Logged
Home Automation is an always changing technology

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: Can you view 4 wireless cams at the same time?
« Reply #6 on: January 26, 2007, 06:57:25 AM »

I guess if the cameras where on opposite sides of the home. Each in theory could only broadcast to the one facing its antenna. I have seen that cameras on the back side of the receivers antenna have very poor range. Long shot not guaranteed to work 100% or at all.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.