3.204 -- where do you get updates from X10?
Like
Dan said, 3.204 is the latest version of
AHP... however it does change to 3.206 when you add the
OnAlert plugin.
All the macros are set to "Run from Computer".
I am monitoring "L" and transceiving NO codes on hardware configuration
This is the combination I was curious about. I had experienced this myself when I first used macros set to run from the computer after I added
OnAlert (
so I don't know if this was OnAlert specific or AHP in general). When I had a macro stored on the pc and triggered from a non-security RF device, I found I had to transceive that house code to get it to trigger the macro consistantly. To me it appeared the run from pc macro worked reliably from a power line signal and not so good from an rf signal.
I haven't played around with this to find out for sure why or what was really happening; I just separated my macros to have the triggered ones stored in the
CM15A and they called phantom macros that had to be run from the pc. You may want to try and transceive house code A on the
CM15A, or change the macros to store in the
CM15A.