Please login or register.

Login with username, password and session length

Author Topic: What's best way to lift Outside Camera on single level house to 20' high?  (Read 5834 times)

essp2003

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 50

And no telephone poles near, for back corner of house.

Thanks!!

Please leave links if possilbe   ;D
Logged

Dan Lawrence

  • Hero Member
  • *****
  • Helpful Post Rating: 68
  • Posts: 3991

You should be able to get a 20 foot steel pole at either Lowe's or Home Depot.
Logged
I don't SELL this stuff... BUT I sure do ENJOY using it!!!

KDR

  • Hero Member
  • *****
  • Helpful Post Rating: 53
  • Posts: 758
    • Home Automation Chat

I agree with Dan... And if the camera is going to be in a fixed position you can setup a fake bird house and put the camera inside with the lens blocking the hole so birds don't invade it. If you don't mind birds you can put the camera above the bird house and let the birds use it. I would put the camera above only yo help keep down the bird droppings from landing on the camera.

----------------KDR
« Last Edit: April 19, 2007, 07:06:55 PM by KDR »
Logged
Note: "Guests" may read the X10 forum , but you must register to post!

When I'm online you can find me in the Home Automation Chat Room!

essp2003

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 50

Thanks Guys! I appreciate the information. Birds (and ants) own Florida, so maybe its best to get on their good side.

I always saw vandal proof, and logically, height would HAVE to be part of the a true vandal proof solution.
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127


I always saw vandal proof, and logically, height would HAVE to be part of the a true vandal proof solution.


What I like to do is expose one camera... to make it easy to spot. Then aim all cameras so they can "watch each other" as they focus on the house. That way if you mess with one camera, your "caught" by another one.
Logged
Home Automation is an always changing technology

essp2003

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 50

What I like to do is expose one camera... to make it easy to spot. Then aim all cameras so they can "watch each other" as they focus on the house. That way if you mess with one camera, your "caught" by another one.


Dave,

Excellent point! Figuring out layout seems like 90% of battle, especially real close to suspect neighbors on single level houses. That makes it especially challenging so you're strategy seems valuable.


Thanks!!
Logged

KDR

  • Hero Member
  • *****
  • Helpful Post Rating: 53
  • Posts: 758
    • Home Automation Chat

After giving this more thought I came up with a 3 step plan  ::) 







 ;D ;D ;D ;D ;D ;D ;D

----------------KDR
Logged
Note: "Guests" may read the X10 forum , but you must register to post!

When I'm online you can find me in the Home Automation Chat Room!

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127


After giving this more thought I came up with a 3 step plan  ::) 


Watch out for that third step!   LOL
Logged
Home Automation is an always changing technology

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10

After giving this more thought I came up with a 3 step plan...
I like your plan. Perfect position for additional security options. e.g. It would be easy to add a moat around the house.
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.