Please login or register.

Login with username, password and session length

Author Topic: Unable to transmit audio  (Read 8668 times)

stevendworken

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Unable to transmit audio
« on: September 09, 2007, 11:44:49 PM »

Help!   I am a newbie in all this and trying to very simply send audio from one device to another.  I just received a set of the audio/video transmitter-receivers.  I am attempting to come out of a standard audio PA using the "record" line out (this would generally go to a cassette or DVD recorder) it is a non amplified low level signal I am told.  I hook the RCA cables to the sender, insure all switches are set right, the antennas are pointed at each other and hook the receiver to the MD/Tape on my Sony Amplifier.  I get NOTHING.  If I take the output to a recorder I works fine, so I know I am getting signal out, it is just not going to the receiver.  The units are 15 feet apart, there are no devices interfering with the sender or receiver.  What am I doing wrong?  Or is this product just not capable of doing what I need done and not able to do what it was advertised to do?

Thank you in advance for your help!
Steven
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.