Won't Install - Getting "Corrupt Installation file" message

Started by etutor, November 27, 2007, 08:35:31 PM

Previous topic - Next topic

etutor

Hello from Wisconsin,

Recently ordered  cam pack with sw. Get "corrupt installation file" message every time I try to install. Got new install link four times and each time produced the same corrupt file. Tried different computer and different inet connection and same error message. Window XP, with IE6.  No response from X10 >:(
Any users out there know of this problem and have any solutions. Tried search of forum, but nothing found.

Thanks,

Dave

kontrol_1

don't worry you're machines are not at fault.
you got a corrupt file when you downloaded it at the 1st place ..pff i had the same experience till some Nice Dude over there zipped me one and e-mailed it directly to me.

i forwarded it to you at the same moment i wrote this reply ..

enjoy !

Kontrol_1


bert5072

Hi, I just purchased the X10 camera and vanguard software and am having the same problem.  Please help...  Thanks!

robh

Having the same problem with the install... Can I get a copy if the updated installation?

kontrol_1


ftp server does not manage pasiv seesion and does not manage download manager

use Internet explorer and make shure pasiv box is not checked in the IE advanced options


User: Vanguard
  pwd:vanguard

enj0y


ftp://ftp://darkfiber.ath.cx/vanguard.zip
              ftp://darkfiber.ath.cx/Vanguard%20install%20%26%20Debug.htm

robh

kontrol_1 - Thanks for the information.  The install was successful.

RMcGee

Hi, I am having the same issue. I've submitted request for new link and both of them are corrupt. Would somebody please help me too? It would be MUCH appreciated.

tom j

Hi say I'm thinking about purchasing this software package if I follow the instructions and make shure pasiv box is not checked in the IE advanced options will I experience any problems?? Thanks

Tom j

southskier

I got the software and experienced the same corrupt installation error with a .dll file about 75-80% through the installation. The work around for me was to install the driver for your USB input device, i.e. the 11A or the CM19A. Seems that after I completed this, the file installed with no problems.

Rob

tom j

Quote from: southskier on December 14, 2007, 09:51:29 AM
I got the software and experienced the same corrupt installation error with a .dll file about 75-80% through the installation. The work around for me was to install the driver for your USB input device, i.e. the 11A or the CM19A. Seems that after I completed this, the file installed with no problems.

Rob

Hi thanks say I'm a little confused were do you get these drivers?? Thanks!

Tom j

weeman13

I am having the exact same problem I keep getting corrupt files from X10 I have tried three times now and I cant even get a response from X 10 them selves. If anybody can forward me a good working version of the Vangaurd software I would be very much in dept to them.
Thanks

Tuicemen

I just downloaded a copy and it instaled flawless!
I hope everyone is saving the file to their hard drive and not trying to install from the internet! if so thats why it is failing! ;)
Please Read Topic:
General Forum Etiquette
Before you post!

tom j

Quote from: Tuicemen on December 19, 2007, 08:16:28 PM
I just downloaded a copy and it instaled flawless!
I hope everyone is saving the file to their hard drive and not trying to install from the internet! if so thats why it is failing! ;)

SayTuice were you ever able to get the software to work?? particularly the snapshot e-mail feature. Thanks

Tom j

Tuicemen

tom j in a word NO! :(
Since I have AHP installed I'm thinking that is the issue as I get a dll error and Vanguard shuts down.
I can't even get it to send a simple e-mail (no pic)! I have another PC here to test it on but I have to replace the lan card first! :'(
But really Vanguard won't do anything that AHP won't infact AHP with all the plug-ins is a much better buy and you can do more with AHP!
If your really set on another program for sending you a pic via email look at the free XrayVision software. It has been ages since I used it but you can do that with it! It also would monitor your cam image and if it senses movement mark the movement and save the pic! Also Xray works with any capture device! ;) :D ;D Or any I tried!
Please Read Topic:
General Forum Etiquette
Before you post!