Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[BTech]

Hi, I'm new and have just finished setting up my DS7000.  Everything has installed well and I was able to program my phone numbers to be called by the system but when I try to record my "alert message", - set to install, press record and talk clearly into the microphone - after the 15 seconds of recording the record light goes off  - set back to run mode, plug in headphone, .......... no message, only a humming sound.  I have tried multiple times but nothing.  When I trip the alarm, it does call my cell but of course I get no message. 

When I first received the set I briefly set up the system on my table and tested all the components and was able to record a message then..... I was very happy and decided I would put the system away (until I could get time to install properly), took out all batteries etc, and 2 weeks later after installing (today), I'm not so happy.

Does anyone have any ideas?.... thanks in advance.

[Tuicemen]

You are doing every thing right!
Try this:

[li]Unplug from the outlet and phone jacks[/li]
[li]Ensure you have a good battery installed[/li]
[li]Plug in the ear piece[/li]
[li]Flip console to install mode[/li]
[li]Press record[/li]
[li]Speak into the console[/li]
[li]When finish speaking flip to run[/li]
[li]Once the record light goes out flip back to Install then to run[/li]
[li]If it works plug back into an outlet and the phone jack[/li][/color]
[/list]
If this doesn't work then your dS7000 has failed! Contact customer service 800-675-3044 to see if you qualify for a replacement!

[PajamaGuy]

When finish speaking flip to run
Once the record light goes out flip back to record then to run
If it works plug back into an outlet and the phone jack

When finish speaking flip to run
Once the record light goes out flip back to record INSTALL then to run
If it works plug back into an outlet and the phone jack

[Tuicemen]

Good catch PajamaGuy (all fixed)!