Hello all, I'm new to the forum and have just purchased a CM15A along with a number of modules. I am experiencing problems with the remotes I have, SS13A (slimline switch) and UR73A-2 (5 in 1 remote). I can configure the remotes to any house code I want and have verified they work. The problem is that both remotes need to be within 2 feet of the CM15A before they can be sensed. I have verified this by looking at the activity log and see the correct house code and unit code are recognized (when the remotes are within two feet of the CM15A).
Remote Configuration
Both are set to House Code D
Hardware Configuration
Monitored House Code is set to A - example HC10LM lamp module is addressed to A 1
Transceived House Code is set to specific and 'D' is checked
Observations
Installed modules can be turned on and off from the PC
When I look at the 'Find Other Computers' my modules show as green under the A column.
The remotes show up as a red box under their set house code at their set unit code and all other unit codes show a yellow box under the house code.
If I reprogram the remotes to a different house code and change the tranceived house code to match, now the same thing happens under the new house code ( red and yellow ) where all the unit codes were clear under the house code previously.
Am I missing something here or does it look like serious RF interference or a faulty CM15A?
Thank you for your comments in advance.