Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[summeratlast]

Hi,

I expected that the Clear Interface command in AHP would turn all outlets to OFF (A1 through P16). I wrote a small macro that comprises a choice between two possible sequences. After having used the Clear Interface command, I saved the macro into the interface module . Guess what, the wrong sequence was chosen (meaning that the dummy module that I was testing was not OFF after the Clear Interface command). Could someone tell me more about this command.

Thanks!

[HA Dave]

I expected that the Clear Interface command in AHP would turn all outlets to OFF (A1 through P16). ...................... Could someone tell me more about this command.

I was under the impression that Clear Interface [memory] would simply delete any stored data (date, time, location, commands, macros)

[Dan Lawrence]

You are correct.   You use it to clear the interface when you change .AHP files, like the differences between a file for Winter and a file for Summer.

[steven r]

You are correct.   You use it to clear the interface when you change .AHP files, like the differences between a file for Winter and a file for Summer.

In theory this isn't necessary as loading one will overwrite the current one but many do take the extra step of clearing the CM15A as an extra precaution. Some will even pull their batteries out to assure default condition. There are differing experiences as how this effects flag conditions, however.

[summeratlast]

Even after using the Clear Interface command, the state of the contacts (ON or OFF) of the various house codes used as flags appears to be unknown at the time a macro is entered into the interface. So I guess one has to initialize each dummy module to the desired state before entering the macro into the interface. Still, it puzzles me that the Clear Interface command does not set (either ON or OFF) all of the internal registers that represent the 256 house codes. I guess I'll have to live with it.

[dash]

I've noticed that memory usage in the interface before and after using the 'clear interface' command stays at the same percentage.

Still not sure from the earlier comments what 'clear interface' actually does...

[HA Dave]

I've noticed that memory usage in the interface before and after using the 'clear interface' command stays at the same percentage.

That would force me to assume that your volume of saved macros isn't.... large. I think the space required for date and time is actually reserved... and normal ahx files [macros] don't require much space. Hence... it takes some real macros to effect the percentage. However... some users have reportedly filled the memory.

I just checked my Home Automation Computer [so as] to be accurate... and I currently have 87.36% of [the interface] resources available.

[steven r]

...some users have reportedly filled the memory...

I'm not sure how but I wouldn't doubt it.

[dash]

Just what does happen when...

1   you clear the interface using the menu command Tools/Cear Interface Memory - I'm still not clear despite having browsed this forum

2   you unplug interface and remove battery for 30mins

I've been making a number of changes to my macros last couple of weeks and have taken the precaution of unplugging the interface and removing the battery for 30mins before restoring power and downloading the new settings.

However, after doing this I notice that memory usage (in Tools/Hardware Configuration) shows more space being taken by macros each time, despite macros being made simpler and items removed.

It's almost as if macros are not being cleared at all, and each download is taking a bit more memory.

Currently: macros 5.51, timed events 1.35, dusk/dawn 13.52 (the latter 2 stay constant all the time). Macros showed 5.40 before last power down and new download despite an ELSE being removed and fewer timed events in remaining macros...

How long should it take for memory to clear after removing batteries and power?

What are the default memory readings for an empty interface module?

Any other way of ensuring a complete reset of interface memory?

Thanks

  Dave

[Puck]

Just what does happen when...

1   you clear the interface using the menu command Tools/Cear Interface Memory - I'm still not clear despite having browsed this forum

Writes a fixed data byte (either 0x00 or 0xFF) in all user program EEPROM memory.

2   you unplug interface and remove battery for 30mins

Clears all RAM.

[dash]

Just what does happen when...

2   you unplug interface and remove battery for 30mins

Clears all RAM.

If that's the case why, when I restore power and immediately look at memory usage, is around 20% already used (approx 5.4% macros, 1.35% timed events and 13.5% dusk/dawn. Shouldn't these have been wiped?

Confused....

[Charles Sullivan]

Just what does happen when...

2   you unplug interface and remove battery for 30mins

Clears all RAM.

If that's the case why, when I restore power and immediately look at memory usage, is around 20% already used (approx 5.4% macros, 1.35% timed events and 13.5% dusk/dawn. Shouldn't these have been wiped?

Confused....

As I recall, the memory usage is computed only when a schedule of timers and macros is downloaded.  There is a minimum memory overhead which is what you may be seeing after clearing the memory, e.g., the dawn/dusk tables and some jump instructions for timer and macro memory regions.