Please login or register.

Login with username, password and session length

Author Topic: Staircase Direction Lighting  (Read 11311 times)

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Staircase Direction Lighting
« on: July 18, 2008, 06:40:19 PM »

Narrative:
AHP 3.228

Runs from the interface or PC (users choice).

The following macros can be used to detect the direction on motion and turn on the appropriate light. This setup uses 2 motion detectors (one at the top of a staircase and the other at the bottom).

I use this setup to temporarily turn on my downstairs hallway light or my upstairs hallway light. I use the motion sensors OFF signals (set to 2 minutes) to turn off the light. My hallway lights are not normally left on for long term lighting, that is why I have the macros turn them off after 2 minutes.


The following Modules are used:

UpstairsHallLight: wall switch
DownstairsHallLight: wall switch

UpstairsMotion: L13
DownstairsMotion: L15


The following Status Flags are used:

Flag 2: When Cleared (OFF) indicates nighttime (see: Daytime / Nighttime Timer Flag Macro)
Flag 7: Set (ON) when motion is detected Upstairs
Flag 8: Set (ON) when motion is detected Downstairs


Create the following 6 Macros:

 *  Macro 1 Name:
      UpstairsMotion1

     Trigger:
      L13 ON

     Condition(s):
      Flag Status Off - 2, 7, 8

     Action(s):
      Set Flags [7]


 *  Macro 2 Name:
      UpstairsMotion2

     Trigger:
      L13 ON

     Condition(s):
      Flag Status Off - 2, 7
      Flag Status On - 8

     Action(s):
      Turn UpstairsHallLight ON
      Set Flags [7]


     Macro 3 Name:
      UpstairsMotionOFF

     Trigger:
      L13 OFF

     Condition(s):
      Flag Status On - 7

     Action(s):
      Turn UpstairsHallLight OFF
      Clear Flags [7]


** Macro 4 Name:
      DownstairsMotion1

     Trigger:
      L15 ON

     Condition(s):
      Flag Status Off - 2, 7, 8

     Action(s):
      Set Flags [8]


** Macro 5 Name:
      DownstairsMotion2

     Trigger:
      L15 ON

     Condition(s):
      Flag Status Off - 2, 8
      Flag Status On - 7

     Action(s):
      Turn DownstairsHallLight ON
      Set Flags [8]


     Macro 6 Name:
      DownstairsMotionOFF

     Trigger:
      L15 OFF

     Condition(s):
      Flag Status On - 8

     Action(s):
      Turn DownstairsHallLight OFF
      Clear Flags [8]


Notes:

*   These 2 macros will form an ELSE
** These 2 macros will form an ELSE
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.