TV WIRELESS TRANSMITTER RECEIVERS

Started by darticus, November 08, 2008, 07:07:52 PM

Previous topic - Next topic

darticus

I'm using the X10 WIRELESS TV TRANSMITTERS. They work fine but they give me flickers of static on the screen in a line every couple of seconds and a static noise or pop. Do I need a filter on TV receiver or on Transmitter? Which one would I need? Thanks Ron

HA Dave

Quote from: darticus on November 08, 2008, 07:07:52 PM
They work fine but they give me flickers of static on the screen in a line every couple of seconds and a static noise or pop.

I am a big fan of the video sender-receivers. The 2.4 GHz they operate on is a well used frequency. You could be getting interference from a wireless phone or a wifi connection. A little experimenting and searching here at the forum for solutions should be a big help.
Home Automation is an always changing technology

Brian H

If you have a wireless router. We have seen reports of them searching for the best connection cause such things. If you have a wireless router or 2.4HHz. phone to name a few. Tell us what you have and we may have a few tips that will help.