Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: How do I control a TM751 Mini Transceiver with Active Home v1.4?  (Read 2859 times)

kepinel

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
How do I control a TM751 Mini Transceiver with Active Home v1.4?
« on: February 17, 2009, 07:07:16 PM »
Please disregard, solution found.

How do I control a TM751 Mini Transceiver with Active Home v1.4?

I cannot seem to control the switch portion of my TM751 Mini Transceiver via CM11A and ActiveHome v1.4. 

I am thinking it is a problem with Module Selection in the Active Home software.  As there is no TM751 Module available, I have tried using the RR501 as well as both of the two pin appliance modules available.  Using the "All Lights On/Off" commands does not help.

The TM751 House Code is set on A, there is no selectable Unit Code (defaults to 1, I believe).

My EagleEye is set to trip a Lamp Module LM465 via the TM751 and that works fine.

Mini Transceiver TM751 set A
EagleEye MS14A set A1
Lamp Module LM465 set A1
Computer Interface CM11A

Thank you in advance for your help...
« Last Edit: February 17, 2009, 07:22:17 PM by kepinel »
Logged

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: How do I control a TM751 Mini Transceiver with Active Home v1.4?
« Reply #1 on: February 17, 2009, 08:42:07 PM »
Why not share your solution? There could be at least one other person out there still using AH v1.4.  :)

Welcome to the forum! Feel free to post any other questions that may come up for you. It's been a while since many of us have worked with AH v1.4 but there is a wealth of resources here for information.
« Last Edit: February 17, 2009, 08:47:00 PM by steven r »
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: How do I control a TM751 Mini Transceiver with Active Home v1.4?
« Reply #2 on: February 17, 2009, 10:30:53 PM »
krepenil probably meant "Answer found" because I don't think a CM11 (Active Home 1.4) can control a TM751. The CM11 can not send RF.
Logged
"This aftershave makes me look fat"

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13308
Re: How do I control a TM751 Mini Transceiver with Active Home v1.4?
« Reply #3 on: February 18, 2009, 06:38:45 AM »
Right and the TM751 has no power line receiver in it. Thus can't be controlled by any power line signals.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.