Please login or register.

Login with username, password and session length

Author Topic: I am having trouble getting around the previous dim  (Read 2800 times)

Elfmaze

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 48
I am having trouble getting around the previous dim
« on: April 27, 2009, 09:02:24 AM »

Trying to deal with a new WS467.   The dealer told me it was a soft start,  But even after i defined it as a LM14A it was acting the same.   I also do not have any of the extended code things in the activity monitor just (E brite %50). 

As it would seem the only way to turn oin my overhead light is to call it a WS467 And go 4% then 100%

I didn't get a soft start did I?   Though from the wall switch it ramps up great.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: I am having trouble getting around the previous dim
« Reply #1 on: April 27, 2009, 11:41:58 AM »



As it would seem the only way to turn oin my overhead light is to call it a WS467 And go 4% then 100%

I didn't get a soft start did I?   Though from the wall switch it ramps up great.
Sure sounds like you have Soft Start. If you can control brightness locally at the switch, you have SoftStart.
With the newer Soft Start switches also have "Resume Dim", an "ON" command ( or a tap on the switch button) will turn the light on at what ever level it was previously turned off at.
Logged
"This aftershave makes me look fat"

Jsnlong

  • Hero Member
  • *****
  • Helpful Post Rating: 17
  • Posts: 351
    • XKAR
Re: I am having trouble getting around the previous dim
« Reply #2 on: April 27, 2009, 11:45:00 AM »

If this is a new switch then it is a soft start. If you press (not hold just press and release)m the button on the switch it will ramp up to the brightness

The ws467 has a setting that if you shut the switch off when it is dimmed it will only come back on to that dim setting. So yes if it is shut off at a setting other then 100% you will have to turn it on then give it a bright command to go full again.
Logged
People are afraid of robots taking their jobs......The same jobs they complain all day about doing!!

Join the chat at http://www.bdshost.com/ac/

Coach of XKAR
Xenia Kids And Robots
www.xkar.org

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Logged

Elfmaze

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 48
Re: I am having trouble getting around the previous dim
« Reply #4 on: April 27, 2009, 04:21:57 PM »

what does the poll button do?
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: I am having trouble getting around the previous dim
« Reply #5 on: April 27, 2009, 05:04:40 PM »

what does the poll button do?
It only works on the old "2-Way" Appliance module and Lamp module, now discontinued. A poll request to the module would trigger a transmission from the 2-way module (ON, OFF, etc). Was an excellent feature since it provided positive feed back of module status, but alas X10 did not sell enough of them so the products died. I believe the only module X10 makes now which will provide "status" is the RR501, which they will probably kill soon.
Logged
"This aftershave makes me look fat"
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.