Please login or register.

Login with username, password and session length
Pages: 1 [2]

Author Topic: CM15A fails communication test  (Read 11713 times)

phatfield

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 14
Re: CM15A fails communication test
« Reply #15 on: January 07, 2010, 04:43:14 PM »

HanknTesta

I solved the crash of the Hardware Interface Configuration problem on my system by copying an xml file called ICities into my AHP directory.  I have AHP on several systems - the one that kept crashing was missing this file.  It seems to be a file that contains city latitude and longitude data.  Let me know if you would like me to e-mail a copy of the file to you.

This X10 stuff sometimes requires a little patience - I've had my wife hide our sledge hammer for that reason.  B:(

Good luck with your installation.  Hope this helps....
Logged

Dan Lawrence

  • Hero Member
  • *****
  • Helpful Post Rating: 68
  • Posts: 3991
Re: CM15A fails communication test
« Reply #16 on: January 07, 2010, 06:04:19 PM »

The software I was trying to use was indeed the problem. ActiveHome 1.42 does not work with the CM15A. Too bad the web site didn't let me know that!

Thanks to all that helped troubleshoot my problem. Without you, the system would be reduced to dust under a 5 pound sledge hammer.

Thanks to raster69273 for steering me to the "REAL" software. Someone called it "flaky" which is far too kind a word!

My next hurdle is trying to figure out why this garbageware crashes whenever I go to the "Hardware Interface Configuration" window. Any thoughts on THAT matter?

F

OK, I suspect that that attempt to use Active Home software with Active Home Pro hosed the AHP installation somehow.  The ONLY way to correct it is to delete AHP totally and reinstall it from scratch, including deleting the Program Files/ActiveHomePro and Program Files/Common Files/X10 folders.  If you have any .ahx files that you created you can back them up first.
Logged
I don't SELL this stuff... BUT I sure do ENJOY using it!!!

hutchg

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Re: CM15A fails communication test
« Reply #17 on: February 06, 2010, 09:11:13 PM »

HanknTesta

I solved the crash of the Hardware Interface Configuration problem on my system by copying an xml file called ICities into my AHP directory.  I have AHP on several systems - the one that kept crashing was missing this file.  It seems to be a file that contains city latitude and longitude data.  Let me know if you would like me to e-mail a copy of the file to you.

This X10 stuff sometimes requires a little patience - I've had my wife hide our sledge hammer for that reason.  B:(

Good luck with your installation.  Hope this helps....




My system crashes and I've read that it is because I am missing the iCities.xml file, too.  Would you mind emailing the file to me, Please?

Thanks
Hutchg at austin dot rr dot com
Logged
Pages: 1 [2]
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.