Please login or register.

Login with username, password and session length

Author Topic: PSC01 problem, please help!  (Read 4641 times)


  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 13
PSC01 problem, please help!
« on: September 15, 2009, 06:08:28 PM »

I recently purchased a PSC01. The unit has reliability problem. When ever the unit quit to work, the test button is also out of function. Sometimes, I could get it back to work by un-plug and plug or moving the switch. I don't have any idea. Please help! the switches on the unit were set to "B" and "3" with certain codes. I called X10 and, had been told due to an interference?? Is the unit a defective one?

« Last Edit: September 15, 2009, 06:11:59 PM by xiaoyu80305 »

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13263
Re: PSC01 problem, please help!
« Reply #1 on: September 15, 2009, 06:40:05 PM »

I doubt interference would make the local test button from working.
You said sometimes moving the switches for mode and output makes it work. Try moving them back and forth a few times and see if they are just dirty.
If the module still is flaky I would say it is defective.

Also cycleling the power corrects it sometimes. That again sounds like a defective unit. Something needed a power reset to work.
Logged | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.