Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Lm 465 module  (Read 7014 times)

ramhouse

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 13
Lm 465 module
« on: December 14, 2009, 03:39:49 PM »
I'm having problems with the lm 465 module, after setting alarm my light keeps coming on no matter what house code, talk to jennel at tech support, and got nothing, tryed all posible soultions and nothing, at one point i got it to stay off for 7hours but it still comes back on, help please, thanks
ramhouse
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13296
Re: Lm 465 module
« Reply #1 on: December 14, 2009, 04:06:24 PM »
What type of light bulb is in the light?
Are there any zones showing problems?
When you arm with delay the lights are supposed to go on for a minute then go off. Is that where the problem is for you?
Logged

ramhouse

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 13
Re: Lm 465 module
« Reply #2 on: December 15, 2009, 12:10:15 AM »
I don't use the delay, I use a regular light bulb, any thoughts!
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13296
Re: Lm 465 module
« Reply #3 on: December 15, 2009, 06:04:43 AM »
Do you have the LM465 on the Security Code setting the console is set to?
Have you tried leaving the LM465 on the consoles house code but on a different unit code? That would show if an All Lights On command was being sent from maybe the console.
Logged

ramhouse

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 13
Re: Lm 465 module
« Reply #4 on: December 16, 2009, 01:52:26 PM »
so you mean to do the opposite of the instructions, i will try different combos
Logged

Bill59

  • Full Member
  • ***
  • Helpful Post Rating: 1
  • Posts: 54
Re: Lm 465 module
« Reply #5 on: December 16, 2009, 02:45:04 PM »
Do you have a close neighbor with x-10?
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Lm 465 module
« Reply #6 on: December 16, 2009, 03:38:22 PM »
Quote from: Bill59 on December 16, 2009, 02:45:04 PM
Do you have a close neighbor with x-10?
Or another Lamp Module you could try?
Logged
"This aftershave makes me look fat"

ramhouse

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 13
Re: Lm 465 module
« Reply #7 on: December 19, 2009, 10:49:45 PM »
I have tryed all unit numbers and it keeps coming back on, any feed back!
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13296
Re: Lm 465 module
« Reply #8 on: December 20, 2009, 07:23:11 AM »
Did we try changing the House Code on the lamp modules only. So it doesn't match the consloes House Code. So the console should not control them at all?
Do you have any PowerFlasher Modules?
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Lm 465 module
« Reply #9 on: December 21, 2009, 10:31:57 AM »
Quote from: ramhouse on December 19, 2009, 10:49:45 PM
I have tryed all unit numbers and it keeps coming back on, any feed back!
Did you try anything that has been suggested? Can't help until you start narrowing things down.
Logged
"This aftershave makes me look fat"

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13296
Re: Lm 465 module
« Reply #10 on: December 21, 2009, 10:43:12 AM »
Did you try a different House Code that is not in use by anything else?
That way it should never light. If it does. We have some deep troubleshooting to do.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.