dual phase coupling

[Brandt]

I know some issues can arise if you have two repeater/couplers, but one about one repeater/coupler and one passive/coupler?

For example, I have a Signalinc coupler/repeater on the dryer outlet, but there is one phase that is just not getting enough signal, could I also put some sort of coupler on at the breaker panel to help spread the signal?

or should I just get an XTB-IIR and stop wasting my time 

[Brian H]

Putting a passive coupler in the same breaker panel would not do much. Depending on if it is a inverting type; it could actually cancel the repeaters signals. Maybe the weaker phase need more noise suppression and signal sucker investigation.

I will have to look at my notes. I think I tested my Smarthome Dryer Repeater with an XTBM with the XTB-IIR turned off.

I may have given you Jeffs Troubleshooting link but; http://jvde.us/x10_troubleshooting.htm.
The portion on repeaters and couplers may give you more data.

[Brandt]

Yes, I read all Jeff's stuff, its great! I even bought an XTBM from him. I know I would eventually like an XTB-IIR and a w800usb, but I gotta spread out my purchases, and am looking for a cheap quick fix if possible.

[Brian H]

Well others may have different thoughts on using a repeater and passive coupler together.

[Mellowmark]

well you could try it and let us know. But you will get better results with just the repeater coupler in the panel and eliminate the dryer unit.

[GregH]

I was having "issues" such as yours.  I built the XTB-IIR and have it installed at the dryer outlet which is about 20 feet from the breaker box.  I get high signal strength all around the house now. 

[Brandt]

I was having "issues" such as yours.  I built the XTB-IIR and have it installed at the dryer outlet which is about 20 feet from the breaker box.  I get high signal strength all around the house now. 

Yeah I'm going to quit messing around and buy one....c'mon paycheck!