Please login or register.

Login with username, password and session length

Author Topic: Programming ir34a with long channel numbers  (Read 90181 times)

jeth

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 26
Programming ir34a with long channel numbers
« on: April 25, 2013, 03:12:29 PM »

I have several sets that are working directly with cable input (no set top box), and they receive digital channels via a QAM tuner.

The problem is that some of these QAM channel numbers are too long to enter when programming the ir34a, which only allows 6 characters.

One such channel on one set is the ION/PXN channel which appears as 117-703; the dash must be entered.  Some QAM tuners use a period instead of a dash, but it is still required.

I thought of programming a macro, but they have a minimum delay of 1 second between commands which is enough to cause the first part of the command to disappear.

How can this be accomplished?
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.