Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[cherokee2000]

just bought a video multiplexer from ebay. there isn't any wire to plug it in, and none of my x10 cams plug into it. are there special cables i need for this. or i'll just send it back .any info is appreciated..thank you

[J.B.]

Most CCTV hardware uses BNC connections.
You should be able to find RCA to BNC type adapters that allow you to plug your x10 cameras into the unit.
You should then be able to use any standard RCA audio or video cable to make your connections.

[dave w]

P.S. Radio Shark used to carry these BNC to RCA adaptors J.B pictured.

[J.B.]

P.S. Radio Shark used to carry these BNC to RCA adaptors J.B pictured.

That is exactly where I purchased a good number of mine.

Tiger Direct also carries a number of these : http://www.tigerdirect.com/applications/SearchTools/search.asp?keywords=RCA+to+BNC&searchbtn.x=0&searchbtn.y=0

Sorry, I was a bit vague with my response. 

cherokee2000, if you have any other questions, feel free to ask. 

Good luck with your setup!

[cherokee2000]

thank you all very much. one more question, this multiplexer did not come with a power plug what's with that, and can i buy one..thank you all again

[J.B.]

If there is a sticker with the power supply info or the brand name and model on the multiplexer, you should be able to find some additional information with a Google search.
Chances are you can find a universal power supply that will work as long as you match the requirements for the unit.

[coolspot]

thank you all very much. one more question, this multiplexer did not come with a power plug what's with that, and can i buy one..thank you all again

Radio Shack or your local electronics surplus store.

Check the label for the proper voltage and minimum milliamps required.