Topic: LM465 dims until light is off with only one push of blue down arrow on HR12A (Read 6858 times)

Brian H · « **Reply #15 on:** October 26, 2010, 04:39:00 PM »

I have not tried one of the real new ones.
They use a completely different microcontroller that is surface mounted on the PCB. Along with a new receiver daughter card using the same chip as in the CM15A's receiver. They do beat my older ones in RF reception distances.

danoathome · « **Reply #16 on:** December 08, 2010, 01:36:23 PM »

I want to thank everyone for their help. As suspected, the TM751 was bad. I ordered an RR501 and just received it. The dimming of all lights now works fine... Now onto ActiveHome Pro and maybe Dave's voice Commander. Thanks to all... again.

HA Dave · « **Reply #17 on:** December 08, 2010, 09:30:24 PM »

Quote from: danoathome on December 08, 2010, 01:36:23 PM

Now onto ActiveHome Pro and maybe Dave's voice Commander.

Thanks for the compliment! However I am just BVC's biggest fan... a guy named Bill wrote [as well as owns and distrubites BVC]. Bill is also an Administrator here at the X10 forum (a volunteer position).

I started using BVC back a few years ago when it was more or less unknown. So I created my Fan Page and some YouTube videos (see links below) to help Bill market his awesome software.

News:

Author Topic: LM465 dims until light is off with only one push of blue down arrow on HR12A (Read 6858 times)

Brian H

Re: LM465 dims until light is off with only one push of blue down arrow on HR12A

danoathome

Re: LM465 dims until light is off with only one push of blue down arrow on HR12A

HA Dave

Re: LM465 dims until light is off with only one push of blue down arrow on HR12A