Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Non Dimming Switch like WS467  (Read 4206 times)

lviper

  • PI Expert
  • Hero Member
  • ******
  • Helpful Post Rating: 10
  • Posts: 294
Non Dimming Switch like WS467
« on: January 18, 2011, 03:50:15 PM »
Is there a switch that is like the WS467 but not dimming? I need it to fit behind a normal switch plate. Not like the paddle type.
Logged

Dan Lawrence

  • Hero Member
  • *****
  • Helpful Post Rating: 68
  • Posts: 3991
Re: Non Dimming Switch like WS467
« Reply #1 on: January 18, 2011, 04:51:02 PM »
Not by X10.    Check the Smarthome site, they may have a non-dimming wall switch that can be used by X10/AHP.
Logged
I don't SELL this stuff... BUT I sure do ENJOY using it!!!

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Non Dimming Switch like WS467
« Reply #2 on: January 19, 2011, 06:45:47 AM »
There is a Smarthome ToggleLinc Relay module.
It can have an X10 address programmed into it.
It also is a two way device so if you turn it On or Off locally. An X10 On or Off command is also sent back on the power line.
Also will respond to a X10 status request.
Like other relay style modules it does require a Neutral power connection to work.

The toggle actuator is not quite what a fully mechanical one would look like. It points straight out and you flip it down for Off and flip it up for On. When released it recenters.

I looked at the Leviton site and did not see a automated switch with a toggle actuator.
« Last Edit: January 19, 2011, 07:06:09 AM by Brian H »
Logged

lviper

  • PI Expert
  • Hero Member
  • ******
  • Helpful Post Rating: 10
  • Posts: 294
Re: Non Dimming Switch like WS467
« Reply #3 on: January 19, 2011, 08:51:48 AM »
Thanks guys. The togglelinc looks like just what I want/need. However, my switch does not have the neutral wire unfortunately. House is to old to rewire. Plaster walls.

My problem is no one in the house likes the push button on the ws467. They just can't get used to a quick press and wait a half a second. So they hold it and complain the light is dimmed. I might just switch them out with non-dimming switches since we never dimmed those lights before, the feature wouldn't be missed.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Non Dimming Switch like WS467
« Reply #4 on: January 19, 2011, 05:56:04 PM »
Quote from: lviper on January 19, 2011, 08:51:48 AM
The togglelinc looks like just what I want/need. However, my switch does not have the neutral wire unfortunately. House is to old to rewire. Plaster walls.

Well if you know your way around a soldering iron, rosin core solder, and Radio Shark, here ya go:
http://forums.x10.com/index.php?topic=20348.0
Logged
"This aftershave makes me look fat"

lviper

  • PI Expert
  • Hero Member
  • ******
  • Helpful Post Rating: 10
  • Posts: 294
Re: Non Dimming Switch like WS467
« Reply #5 on: January 19, 2011, 06:39:16 PM »
Quote from: dave w on January 19, 2011, 05:56:04 PM
Quote from: lviper on January 19, 2011, 08:51:48 AM
The togglelinc looks like just what I want/need. However, my switch does not have the neutral wire unfortunately. House is to old to rewire. Plaster walls.

Well if you know your way around a soldering iron, rosin core solder, and Radio Shark, here ya go:
http://forums.x10.com/index.php?topic=20348.0

That is a thought, thanks
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.