You Can't Make This One Up !!!

Started by bt54, April 18, 2011, 07:32:05 PM

Previous topic - Next topic

bt54

This is for real.................

Newest AHS Software.

I have a WS467 Wall Switch and an incandescent bulb in a lamp.  From AHS the WA467 will activate the light flawlessly.

I have a macro triggered by a security Motion Sensor that signals the WS46 to turn a light on.  When triggered, the AHP console displays the switch as ON - but the light is OFF!!!  When checking the log the switch was sent an ON signal.

I can go to the switch and manually turn it ON, the lamp lights and it displays as ON in AHP.

Sorry but I'm not making this stuff up !!!
If it doesn't work get a BIGGER hammer!!

dave w

#1
Quote from: bt54 on April 18, 2011, 07:32:05 PM
I can go to the switch and manually turn it ON, the lamp lights and it displays as ON in AHP.
I bet AHP displayed it displayed as ON before you turned it on at the WS467 switch. The WS467 can not transmit it's status.   :'
"This aftershave makes me look fat"