Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Andrew in NB]

I have a new system with 4 cameras... the problem is that I can only see the cam that is close est to the receiver... it i turn it off.. i can then only see the next one out.. help???

[hawk1]

You can only view one camera at a time.  When you turn one on the others should turn off.

[Brian H]

Wireless cameras are controlled by power line signals.
Do you have all of the cameras on the same House Code?
The Units Codes work in groups of four. 1-4,5-8,9-12 and 13-16. Turn any one on in the group and the others go off.
Since the cameras default to On when powered up. Until you turn one On all of them will stay on and step on each other.

What are you using to control the cameras?

A list of the model numbers of what you have will also assist in getting you a solution.

There is some good information in the knowledgebase you may want to look at.
http://kbase.x10.com/wiki/Wireless_Cameras

[Andrew in NB]

Tks.. got it working!!!