Please login or register.

Login with username, password and session length

Author Topic: CM15A can control TM751, but cannot pick up TM751 signal, any idea?  (Read 3181 times)

wyx2000

  • Full Member
  • ***
  • Helpful Post Rating: 1
  • Posts: 67

I assume CM15A control TM751 by power line, but CM15A doesn't pick up signal from TM751,
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: CM15A can control TM751, but cannot pick up TM751 signal, any idea?
« Reply #1 on: August 17, 2011, 03:43:04 PM »

The CM15A or any X10 power line controller. Will not control a TM751.
Now in the Appliances list in AHP you will find the TM751 and RR501 Transceivers.
When you pick the TM751 it sends an X10 RF signal to it.
The RR501, that has a power line receiver in it. Gets a power line command.
« Last Edit: August 17, 2011, 04:01:26 PM by Brian H »
Logged

wyx2000

  • Full Member
  • ***
  • Helpful Post Rating: 1
  • Posts: 67
Re: CM15A can control TM751, but cannot pick up TM751 signal, any idea?
« Reply #2 on: August 17, 2011, 04:41:30 PM »

Ok, so what I assumed is wrong, CM15A send RF signal to TM751. But that doesn't matter, now CM15A can control TM751, the issue is CM15A doesn't know what TM751 does. TM751 send power line signal to control lamp module etc, and CM15A can pick up signal from power line, so I wonder why CM15A doesn't know what TM751 does.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: CM15A can control TM751, but cannot pick up TM751 signal, any idea?
« Reply #3 on: August 17, 2011, 04:46:51 PM »

The address of the module the TM751 was controlling has to be in AHP.
If the power line signals are not getting to the CM15A. You may have power line signal problems.
I gave you details in another thread.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.