Contact | X10.com
Please login or register.

Login with username, password and session length
Pages: 1 2 [3]

Author Topic: Stick-a-switch Intermittent Working  (Read 14262 times)

dhouston

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 37
  • Posts: 2547
    • davehouston.org
Re: Stick-a-switch Intermittent Working
« Reply #30 on: October 17, 2011, 09:10:51 PM »
Quote from: Dan Lawrence on October 17, 2011, 08:58:05 PM
Since this topic is for the SS13A "Stick-a-Switch" I got my new one today and it's an improvement over the older ones.  It was easy to set the housecode from A to F and the switches are much easier to use, just a touch (not a "push) turns the lights on and off.

Is the range any better than this...
Logged
This message was composed entirely from recycled letters of the alphabet using only renewable, caffeinated energy sources.
No twees, wabbits, chimps or whales died in the process.
https://www.laser.com/dhouston

Dan Lawrence

  • Hero Member
  • *****
  • Helpful Post Rating: 68
  • Posts: 3991
Re: Stick-a-switch Intermittent Working
« Reply #31 on: October 18, 2011, 07:55:29 AM »
Range is not a problem with my two SS13As.   Both are less 5 feet from the RR501s that get the signals.
Logged
I don't SELL this stuff... BUT I sure do ENJOY using it!!!

Dave4720

  • Sr. Member
  • ****
  • Helpful Post Rating: 13
  • Posts: 81
It’s A Wrap!
« Reply #32 on: October 31, 2011, 10:27:33 AM »
So I put a 4-position cc switch (KR22A) where the Stick-A-Switch was, and it has been working flawlessly.  I marked the rubber push buttons with a short code regarding their function.

I also noticed the KR22A has two stacked batteries (6V), whereas the Stick-A-Switch only has a single battery.  That may be why the Stick-A-Switch has such short range.

Anyway, another issue solved.  Thanks for all who contributed.


Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: It’s A Wrap!
« Reply #33 on: October 31, 2011, 05:39:54 PM »
Quote from: Dave4720 on October 31, 2011, 10:27:33 AM
I also noticed the KR22A has two stacked batteries (6V), whereas the Stick-A-Switch only has a single battery.  That may be why the Stick-A-Switch has such short range.

OK who is game to crank the supply voltage on a SS up to 6V to see what happens? ...I guess it is really moot since there is no way to add an extra 3V with out making the "Slim Line" switch a "fat line" switch.
« Last Edit: October 31, 2011, 08:19:18 PM by dave w »
Logged
"This aftershave makes me look fat"

Dan Lawrence

  • Hero Member
  • *****
  • Helpful Post Rating: 68
  • Posts: 3991
Re: It’s A Wrap!
« Reply #34 on: October 31, 2011, 05:44:37 PM »
Quote from: dave w on October 31, 2011, 05:39:54 PM
Quote from: Dave4720 on October 31, 2011, 10:27:33 AM
So I put a 4-position cc switch (KR22A) where the Stick-A-Switch was, and it has been working flawlessly.  I marked the rubber push buttons with a short code regarding their function.

I also noticed the KR22A has two stacked batteries (6V), whereas the Stick-A-Switch only has a single battery.  That may be why the Stick-A-Switch has such short range.

OK who is game to crank the supply voltage on a SS up to 6V to see what happens? ...I guess it is really moot since there is no way to add an extra 3V with out making the "Slim Line" switch a "fat line" switch.

If a 6 volt battery the same size as the one supplied for the SS is made (about the size of a penny) it might work.
Logged
I don't SELL this stuff... BUT I sure do ENJOY using it!!!
Pages: 1 2 [3]
« previous next »
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.