Please login or register.

Login with username, password and session length

Author Topic: THE MICROMODULES in switches (tilting)  (Read 9372 times)

ROGIS

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 11
THE MICROMODULES in switches (tilting)
« on: November 13, 2011, 06:12:03 AM »

I decided to buy the plant sc1200. Over time I will do my domotica more sensors and wafers with time.

In my house all the switches are permanent conventional switches (tilting) and can act wafers x 10 if the swingarm off?

I also use permanent conventional switches (tilting) in the motor and use blinds wafers x 10 in this place?

I can change all buttons to switch easily?

Greetings from Spain
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13294
Re: THE MICROMODULES in switches (tilting)
« Reply #1 on: November 13, 2011, 09:57:45 AM »

Message threads here. Are saying the SC1200 is discontinued and almost all dealers are out of them.
Logged

ROGIS

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 11
Re: THE MICROMODULES in switches (tilting)
« Reply #2 on: November 13, 2011, 01:48:00 PM »

In Spain the plant is called central control (XTP040503) "MAXICONTROLADOR LCD". In Spain there is little information on this x10 home automation and more expensive than in U.S.

The plant interested me and alerts tlf control and power failure warning. What other product do you recommend?

Thanks for your interest. ;)
Logged

Dan Lawrence

  • Hero Member
  • *****
  • Helpful Post Rating: 68
  • Posts: 3991
Re: THE MICROMODULES in switches (tilting)
« Reply #3 on: November 13, 2011, 05:47:52 PM »

As I mentioned in your other thread, European X10 won't work in the US and Canada due to the difference in electric power.
Logged
I don't SELL this stuff... BUT I sure do ENJOY using it!!!

ROGIS

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 11
Re: THE MICROMODULES in switches (tilting)
« Reply #4 on: November 14, 2011, 12:29:43 AM »

Thanks I have learned that what in Europe is 230v.

My question is to use the 310 MHz RF in Europe with a CM19A on the PC. And an RF 433.9Mhz CM15. The 2 RF simultaneously.

Thank you all for esata there.

pd:  A more SC1200 310 MHz RF, works with 12v (using electric adapter for 230v) officer? You can choose idiama Spanish?
« Last Edit: November 14, 2011, 12:31:45 AM by ROGIS »
Logged

ROGIS

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 11
Re: THE MICROMODULES in switches (tilting)
« Reply #5 on: November 14, 2011, 02:17:28 AM »

This clarifies my questions mixed RF:

http://www.rfxcom.com/config_rules.htm
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13294
Re: THE MICROMODULES in switches (tilting)
« Reply #6 on: November 14, 2011, 06:18:52 AM »

The XM19A Power Adapter in the SC1200 Kit. Has a DC power supply, Zero Crossing Detector and the Power Line Transmitter in it.

A standard DC wall power supply will not work with a SC1200. You have to use the XM19A for 120 volt use or the one supplied in the 230 volt kits used in Europe.
Logged

ROGIS

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 11
Re: THE MICROMODULES in switches (tilting)
« Reply #7 on: November 14, 2011, 06:37:17 AM »

Ok thanks got it. Buy a European SC1200 (220V) with (RF 433.9Mhz)

Now try using the 2 radio frequencies at once (433.9 MHz and 310MHz)

With CM15 (RF 433.9 MHz) + CM19 (310MHz), I can run?

regards
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13294
Re: THE MICROMODULES in switches (tilting)
« Reply #8 on: November 14, 2011, 07:02:44 AM »

Is the CM15 a European one? The USA version is 310MHz.

I don't know of anyone running both a CM15 and a CM19 at the sametime.
If you are using AHP. I seriously doubt it will work.
« Last Edit: November 14, 2011, 07:05:17 AM by Brian H »
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.