Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Integrate with tcp/ip  (Read 4492 times)

telenova

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Integrate with tcp/ip
« on: November 01, 2012, 05:50:49 AM »
Hello friends .....

Can we integrate X10 protocol with TCP/IP protocol ?

or can we access X10 devices using TCP/IP port ?

please help me  ???

i am newbie so i want to know more about X10 protocol and its features so please help me  

Thank you .....
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Integrate with tcp/ip
« Reply #1 on: November 01, 2012, 07:35:32 AM »
Try Googling "X10 and Ethernet", or "X10 and TCP IP".

RXCOM makes a RF to ethernet box which can pick up RF transmissions of X10 RF devices (USA or Euro frequencies) like motion sensors and hand held remote controls. But that is only half of the equation. You still need a TCP to X10 translation. I don't know what software is out there to accomplish that. Again Google is your friend. I do know Homeseer automation software http://www.homeseer.com/  has plug-ins for RXCOM devices. Homeseer can interface to X10 powerline controls through several interfaces like the CM15A and CM11A from X10, or ACT's TI103, etc.
Logged
"This aftershave makes me look fat"

localuser

  • Full Member
  • ***
  • Helpful Post Rating: 4
  • Posts: 31
Re: Integrate with tcp/ip
« Reply #2 on: November 06, 2012, 11:32:18 PM »
There is an open source solution called MOCHAD that might meet your needs.  It runs linux and a few other platforms.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Integrate with tcp/ip
« Reply #3 on: November 07, 2012, 06:00:52 AM »
There is data on the actual X10 protocols {RF Power Line} on this web site.
http://www.davehouston.net/
Logged

dhouston

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 37
  • Posts: 2547
    • davehouston.org
Re: Integrate with tcp/ip
« Reply #4 on: November 07, 2012, 08:01:01 AM »
Quote from: dave w on November 01, 2012, 07:35:32 AM
Again Google is your friend.
But is much friendlier if you give it RFXCom.
Logged
This message was composed entirely from recycled letters of the alphabet using only renewable, caffeinated energy sources.
No twees, wabbits, chimps or whales died in the process.
https://www.laser.com/dhouston

fitbrit

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 27
Re: Integrate with tcp/ip
« Reply #5 on: November 13, 2012, 12:36:31 AM »
Maybe this will be of use to you: If you have a PC that runs 24/7 anyway, and can get hold of a CM19 and RF transceiver, you can download X10 Commander by Melloware. This will allow an iPhone/iPad/iPod Touch/Android to control everything if you install the paid app on the mobile device. You can use your mobile device from anywhere in the world if you use a domain forwarding service.
However, even cooler is that you can use http commands from within your local network to control devices, and this is free. Thus you can use any browser from within your network, or program a remote app such as iRule to do so.
http://melloware.com/x10commander/
Logged

fitbrit

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 27
Re: Integrate with tcp/ip
« Reply #6 on: November 13, 2012, 01:18:59 AM »
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Integrate with tcp/ip
« Reply #7 on: November 13, 2012, 06:49:36 AM »
I think Telenova is gone.
Logged
"This aftershave makes me look fat"
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.