can not see any video thru my active home pro

Started by GMBAL4, June 19, 2013, 06:14:51 PM

Previous topic - Next topic

GMBAL4

 

       Got all my codes in but still cannot see any video what do I need to do ??

GMBAL4


  Works well on my TV but can`t access on my computer ?? I have 2 cameras a flood camera and 1 on the side of the house

Brian H

Are you using a VA12A or VA13A for video input?
Do you have any of the AHP Plug Ins?

Tuicemen

What video capture device are you using?
What version of windows are you running?
What version of AHP?
??? ??? ???
The more info you supply the faster we can figure this out! ;)
Please Read Topic:
General Forum Etiquette
Before you post!

GMBAL4

  I using windows 7 and I have the VA11A device for video capture all plug ins are inputed in

GMBAL4

 
  This is what Im using for AHP


933556-AJ652

933556-AJ652-31

SW33A

SW33A-SW-AHVID

AHP Plugin - AVX - Video


933556-AJ652

933556-AJ652-21

SW34A

SW34A-SW-MYHOUSE

AHP Plugin - ANT - Network


933556-AJ652

933556-AJ652-1

SW39A

SW39A-AHXHSS

AHP Plugin - Security


GMBAL4

 
  when I try to pull up a video all it shows is the active homepro video monitoring in the screen


GMBAL4

went outside and my house code is A and set to 1 and still no video ??

GMBAL4

 

   I am also using the 2 way computer interface .....model CM15A

Brian H

#10
What version of AHP? Should show the revision. In the help about selection of AHP. 3.318 is the latest revision.
Use this link below to verify you actually have a VA11A. If you do it will not work with Windows 7
A VA12A or VA13A is neeed for Windows 7.
http://kbase.x10.com/wiki/VA11A

GMBAL4

 well it is a VA11A so I will get 1 from ebay I guess and the version is 3.318 it is up to date ...thanks for the help

GMBAL4

my new adapter came in and now it works thanks for the info  >! Now I have a new problem I want to view my cams online and its asking for a system ID were do I get this from ??  ..........Thaks guys for the help !!!

GMBAL4

 

   Hey guys also it has turned on my front camera on my laptop does it supposed to do this ??

Brian H

The wireless cameras are controlled by power line signals.
When powered up. They default to On. So single camera users didn't need a remote and transceiver to control them. Was the camera On maybe by default or did you see the software turn it On?

They work in groups. Same House Code and Unit Code 1-4,5-8,9-12 and 13-16. Turn any one of the group On the other three go Off with out added commands.

You may find some added information here.
http://kbase.x10.com/wiki/Cameras

SMF spam blocked by CleanTalk