Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[dstrass]

I'm using a PAT01 transceivers to receive On/Off signals from two PMS02 motion sensors.
 One sensor sends it's wireless signal and causes the PAT01 to click the "local control" relay with a very loud click.
The other sensor sends it's wireless signal silently.
 Any ideas on how to stop the loud 'click' from the relay? I don't use the local control function.
Thanks.
Dave

My Homevision is still working.

[dstrass]

SOLVED.
There is a physical slider on the front of the unit, labeled "1-9, Unit"
Sliding it to the right disables the load and the click sound on signals 1-9.
Doh.

[Brian H]

SOLVED.
There is a physical slider on the front of the unit, labeled "1-9, Unit"
Sliding it to the right disables the load and the click sound on signals 1-9.
Doh.

Actually it sets the Unit Code to 1 or 9. I suspect your Motion sensors are not using Unit Code 9 so it no longer clicks On and Off.

One other thing to watch. Most Motion Sensors have a Dusk Dawn Sensor in it. Set to the Unit Code +1. So a Sensor on A1 would also use A2 as the Dusk Dawn Sensor.

[dstrass]

Thanks for that.
Been using these since 2001 and never knew the function of that slider switch!
I'm silent and happy.
Thanks!