Please login or register.

Login with username, password and session length

Author Topic: WiFi Hub does not retain time on power outage or moving (resolved???.....)  (Read 7041 times)

DennisR

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2

Just received my WiFi Hub this week.  Noticed that if it does not have power the time defaults back to 1am and you have to go into setup and sync the time.  Anyone having the same issue?  I was kind of surprised that it had no place to put in batteries as a backup option.   I am also new to doing a forum but have been using X10 to control my house and also my 3 barns for some 15 years now.
Thanks, Dennis

Edited by Tuicemen to add resolved to title
« Last Edit: September 20, 2018, 06:48:14 PM by Knightrider »
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: WiFi Hub does not retain time on power outage or moving
« Reply #1 on: February 04, 2018, 12:34:39 PM »

Yep, no Battery backup! :(
There is the suggestion to make this automatic and sync from the internet.
since Authinx has stated suggestions will be looked at in order of their popularity I suggest you look at the wish list and vote fore every thing you wish implemented. ;)
http://forums.x10.com/index.php?board=150.0
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

JeffVolp

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 122
  • Posts: 2285
    • XTB Home Page
Re: WiFi Hub does not retain time on power outage or moving
« Reply #2 on: February 04, 2018, 01:29:46 PM »

Most people have a retired cellphone kicking around.  Would a near-term solution be to install the app on a retired phone and keep that running on a charger in the background just for time sync?

Jeff
Logged
X-10 automation since the BSR days

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: WiFi Hub does not retain time on power outage or moving
« Reply #3 on: February 04, 2018, 01:38:25 PM »

Most people have a retired cellphone kicking around.  Would a near-term solution be to install the app on a retired phone and keep that running on a charger in the background just for time sync?

Jeff
unfortunately  the app doesn't auto sync the time currently
  B:(
The app justs displays a pop up which prompts you to sync the time.
It also waits for user input.
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

runner49

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 11
Re: WiFi Hub does not retain time on power outage or moving
« Reply #4 on: February 04, 2018, 05:17:53 PM »

The time can be re-sync'd from remote location? A power outage in the middle of a week’s vacation would be a bummer.
Logged

Knightrider

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 62
  • Posts: 1748
  • I love my WM100!
    • This Automated House
Re: WiFi Hub does not retain time on power outage or moving
« Reply #5 on: February 04, 2018, 05:33:12 PM »

I just tested this. Yes, the unit can be time-synced from without the Local Area Network.
Logged
Remote control is cool,

but automation rules!

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: WiFi Hub does not retain time on power outage or moving
« Reply #6 on: February 05, 2018, 04:29:14 AM »

I just tested this. Yes, the unit can be time-synced from without the Local Area Network.

Well then.... the only problem would be... it your home (and the WM100) experienced a power outage while you (and your phone) was in a different time zone. My phone automatically readjusts to local time zones.
Logged
Home Automation is an always changing technology

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: WiFi Hub does not retain time on power outage or moving (Bug)
« Reply #7 on: February 07, 2018, 10:12:52 AM »

The time sync is getting a redo. :)%
I know it won't ask for a resync if you move the WM100 after the next update. I'm not sure if the App auto syncs to the WM100 or the WM100 gets the new time from the internet. ::) :'
I'm attempting to find out more details.
Since Authinx stated the developer was only working on bugs and he appears to be looking at this I'll mark it as a bug.
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: WiFi Hub does not retain time on power outage or moving (Bug)
« Reply #8 on: February 14, 2018, 02:59:23 AM »

I did some testing this morning on this with the new app update.
Although the HUB doesn't retain the time if it loses power the app if is open during this period it does not give an out of sync warning and resets the WM100 when power is restored. :)%
However if the app is not open and running on a device then as soon as you open it you'll get the popup warning of a time sync issue.
I noticed the Online status in the app never changes to off line, which is a new bug at least for androids( I'll start a new thread for this)
So Jeff's suggestion:
Most people have a retired cellphone kicking around.  Would a near-term solution be to install the app on a retired phone and keep that running on a charger in the background just for time sync?

Jeff
will now work as long as the HUB doesn't lose power for longer then the spare phone will stay charged for.  ::) :'
Since other then a hardware change to the WM100 or user mod to add a battery will now remedy this I'll mark it as solved.
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

BruceC

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
Re: WiFi Hub does not retain time on power outage or moving (resolved)
« Reply #9 on: February 25, 2018, 08:35:35 AM »

IMHO, I don’t think this issue is completely resolved. If I’m away on vacation, how am I going to know that the HUB needs to be synced? Having it sync time automatically from the internet is essential!
Logged

SkipWX10

  • Sr. Member
  • ****
  • Helpful Post Rating: 1
  • Posts: 141
Re: WiFi Hub does not retain time on power outage or moving (resolved)
« Reply #10 on: February 25, 2018, 12:11:23 PM »

/\ what he said....it needs to do it automatically when power is restored!

Another (cumbersome) workaround would be to sync time several times a day while on a trip. Pain in the *** but I suppose it would at least not let the WM100 be way off for days at a time.
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: WiFi Hub does not retain time on power outage or moving (resolved)
« Reply #11 on: February 26, 2018, 02:52:10 AM »

IMHO, I don’t think this issue is completely resolved. If I’m away on vacation, how am I going to know that the HUB needs to be synced? Having it sync time automatically from the internet is essential!
The OP stated "WiFi Hub does not retain time on power outage or moving"
The app will tell you the hub needs to be synced if It wasn't connected to a phone with the app open.
With the update this is no longer the case if connected to the APP.
A sync from the internet would be far better that is true and I'm sure that will come.
In the mean time using JeffVolp's suggestion solves the issue of time sync
If the WM100 is connected to a device running the app prior to losing power, when it regains power it will auto sync(no pop up warning)

I honestly don't think the developer fully understands Home Automation as the first app build was nothing more then a fancy remote.
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

bubbah

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 27
Re: WiFi Hub does not retain time on power outage or moving (resolved)
« Reply #12 on: September 20, 2018, 06:22:40 PM »

If it's dependent on their server, then it should be able to garner the time sync automatically from that connection adjusted to location, no ??
Logged

ceedee

  • Hero Member
  • *****
  • Helpful Post Rating: 5
  • Posts: 176
Re: WiFi Hub does not retain time on power outage or moving (resolved)
« Reply #13 on: September 20, 2018, 06:36:56 PM »

If it's dependent on their server, then it should be able to garner the time sync automatically from that connection adjusted to location, no ??

All I can say is that lots of other apps don’t seem to have an issue with time, time zones, DST, etc.  I am as baffled as you are.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.