Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Tuicemen]

commands will still show errors as they were configured incorrectly you'll need to remove them all.

[Moose]

When I opened my own attachment from the website message , HABridge4, there is a scroll bar at the bottom to get to the right edge. I have resaved it a little smaller.

[Tuicemen]

Don't bother posting as a docx then as I can't view it correctly

[Moose]

Is this better?

[Tuicemen]

yes delete the line with no info and the line that has your info type in Switch to the other types and click update then save.
once reloaded go to the already configured devices and remove the devicews

[Tuicemen]

add only one HG device and post a screen shot of the page that appears when you click build item

[Moose]

I hope this is what you asked for. 

[Moose]

I have really screwed up now. While playing with HABridge, the light modules on HG are flashing. They seem to be sending continuous light On commands.

I stopped the Bridge service and restarted HG but they are still flashing.

[Moose]

I think maybe I should just reinstall from scratch. HG is hung up.

[Tuicemen]

just reboot your pi

[Tuicemen]

If your lights are still blinking SSH into your pi ha-bridge/data folder then stop the HA-Bridge service and delete all files in the data folder that will reset HA-Bridge then you can restart the ha-bridge service. no need to reinstall.
If everything is working go to the HA-Bridge Device page and click on edit for the device you have setup.
in the edit page copy what is displaying  for the on Target Item and the off Target Item

[Moose]

If your lights are still blinking SSH into your pi ha-bridge/data folder then stop the HA-Bridge service and delete all files in the data folder that will reset HA-Bridge then you can restart the ha-bridge service. no need to reinstall.
If everything is working go to the HA-Bridge Device page and click on edit for the device you have setup.
in the edit page copy what is displaying  for the on Target Item and the off Target Item

I did try rebooting with no change. I tried deleting my devices from HABridge and then stopping the service. I restarted HG alone and it was still sending Light on commands. My conventional X10 controllers would not work. I will get back to this shortly.

[Tuicemen]

Sounds like you've created a loop, are you sure your Cm15 memory is clear?

[Moose]

Okay. I started over. I have Hg working with 5 lights configured. I have HABridge working with 2 lights configured. I did find several fields that I had left blank.

So, how do I get Alexa to interface? I asked Alexa to "discover new devices" but she found none.

[Tuicemen]

If HA-Bridge is on port 80 at the top of the HA-Bridge page is a tab "My Echo" click on it and log in then add devices.