What problems are you having setting up the timers in the P2? If you need help, I can set some up as an example and you can do the rest. You can PM me your Smartenit account info and then I can access it through the web portal to get you started.
Here are the basic instructions:
Create X10 devices by doing the following-
1. Click the Green + in the upper right hand corner of the Dashboard;
2. Select 'Devices'
3. Select 'Switches/Outlets'
4. Scroll down and select either 'X10 Appliance Modules' or ' X10 Dimmers' which are the only two options for X10 devices. Ignore all the others. Use 'Appliance Modules' for X10 motion sensors (NOT security sensors).
5. Click 'Add Now'
6. Enter the name you'd like to call it, a House Code Letter and a Unit Code number where indicated and Click 'Save.'
Now for the timers-
1. Click the Green + in the upper right hand corner;
2. Select 'Automation Rules'
3. Enter a 'Rule Name' i.e., Porch Light;
4. Select 'ALL' or 'ANY' conditions in the When box. ALL is used if more than one condition needs to be true. ANY is selected if just one condition needs to be true. In other systems ALL would be like AND and ANY would be like OR.
5. Tap the green + and select the condition (scroll right to see them all) fill in the appropriate prompts and click 'SAVE'
6. Now do the same for the THEN box and 'SAVE' and you have your timer.
As an example, here's how The MS16A on the front porch sends me an email and a notification when motion is detected:
The 'Porch Indicator' is the motion detector name.
Author
Topic: How to check clock time on CM15A and X10 WiFi (Read 6392 times)