Please login or register.

Login with username, password and session length

Author Topic: LMM21 to LMM31  (Read 1565 times)

npaisnel

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 63
LMM21 to LMM31
« on: January 07, 2022, 01:28:12 PM »


I have a pair of LMM21's here, the two wire dimmer units.

I do not have any LMM31's that have a separate neutral.

But on opening up the LMM21 I see the LMM21 has the pad when the LMM31 would have the neutral, it is even labelled N

So wondering, would it just be a matter of soldering a wire to it to make it function as a LMM31 ..with a neutral  to run the unit .  or are there other missing components?  Any one tried this ?


Might end up going with a Shelly Dimmer 2 module in the end, but would like to stick with X10 a bit longer.

Logged

npaisnel

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 63
Re: LMM21 to LMM31
« Reply #1 on: January 08, 2022, 04:18:23 AM »

Seems these are UK modules/ euro modules and not US. 
So for in for here they are ..

The little daughter board is removable on pins.

LMM21 is two wire single load
LMM22 is two wire two load
LMM3 series is the same with the extra pad populated with a neutral terminal.

Edited to change image sizes..
« Last Edit: January 08, 2022, 04:23:21 AM by npaisnel »
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13294
Re: LMM21 to LMM31
« Reply #2 on: January 08, 2022, 06:30:33 AM »

Can't say about those modules.
I have seen a modification to add the Neutral to a WS467 two wire Wall Switch.
A connection on the board was cut and the Neutral wire solders to the board. So there maybe a jumper removed or a component changed or moved.
Got any photos of the LMM31 board?
You are in a European setup? As those modules are 220V 50Cy.
Logged

npaisnel

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 63
Re: LMM21 to LMM31
« Reply #3 on: January 08, 2022, 09:04:17 AM »

No, unfortunately not, as I do not have one

Can’t find any new ones, but have search saved on eBay
Logged

npaisnel

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 63
Re: LMM21 to LMM31
« Reply #4 on: January 08, 2022, 11:25:19 AM »


You are in a European setup? As those modules are 220V 50Cy.

Yes I am in Jersey (Old Jersey..the place where you got your NJ from)  part of UK but about 12 miles from coast of France...

British step 3 pin sockets and plugs
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.