Help My Brand new WM100 is Locked on UHF

Started by frmichaud, December 07, 2022, 12:28:52 PM

Previous topic - Next topic

frmichaud

I receive a WM100 and my house has a VHF and UHF network
I connected the WM100 on an AC plug and when I go to set up I discovered  that the WM100 is trying to   connect on my UHF net work and noway to forced him to connect to VHF network
Can some body told hoe to forced the WM100bto disconnect to UHF and connect to VHF
Thanks for your help
Francois

Brian H

#1
The WM100 is a 2.4 GH WI-Fi  module.
Can you tell us what you mean by VHF and UHF networks.
As the description VHF and UHF don't describe the network you should be using.

Brian H


frmichaud

I know that the WM100 is a 2,4GHz what I called by error Vhf When I reseive my WM100It immedatly connect tmy 5GHZ network

Brian H

Thank you for the clarification.
You are not alone with routers picking the 5.0 GHz band.
There are other posts here on some fixes found by others.
One thread on this is:  https://forums.x10.com/index.php?topic=31632.0
Until others may post their findings to you.

brobin

Quote from: frmichaud on December 07, 2022, 09:26:32 PM
I know that the WM100 is a 2,4GHz what I called by error Vhf When I reseive my WM100It immedatly connect tmy 5GHZ network
Make sure your phone is connected to 2.4 and not 5G before starting. It's best to set up your router with different SSID's for 2.4 and 5G radios. If you need help with that tell us what brand & model router you have.

Mic_

I just tried what someone posted. I went into my mode's wifi, advanced setting area. I was allowed to deactivate the 5g Setting; Ihit save button. I then reconnected my wm100; It worked. I also connected my 2.4 cameras. They work. I went back and activated the 5g (in my modem) setting and saved it. Everything works

SMF spam blocked by CleanTalk