Please login or register.

Login with username, password and session length

Author Topic: High Current X10 Filter  (Read 832 times)

JeffVolp

  • Moderator
  • Hero Member
  • *
  • Helpful Post Rating: 122
  • Posts: 2285
    • XTB Home Page
High Current X10 Filter
« on: May 06, 2023, 01:20:21 PM »

Because of a cancelled order, I have a small batch of XTB-F10/F15 PCBs.  They will be used for an enhanced high-current filter rated for 15 amps, but with performance almost as good as the XTB-F10.  The new filter will be called the XTB-F15+, and should be ready in a week or so when the Polycases arrive.

While the F15 used inductors rated for 18 amps and 20 amps, the F15+ inductors are rated for 16.4 amps.  The increase in performance is worth the slight reduction in margin at max current.

https://jvde.us/xtb-f10

Jeff
« Last Edit: May 07, 2023, 10:08:52 AM by JeffVolp »
Logged
X-10 automation since the BSR days

JeffVolp

  • Moderator
  • Hero Member
  • *
  • Helpful Post Rating: 122
  • Posts: 2285
    • XTB Home Page
Re: High Current X10 Filter
« Reply #1 on: May 09, 2023, 11:06:34 AM »

I did a comparison between the various plug-in filters.  Not surprisingly, the XPPF with its low-pass topology performed the best.  The XTB-F10, F15, and F15+ all performed better than the 15 amp AF120.  All are notch filters centered at 120KHz.  Loading of the XTB-F15+ is almost as good as the XTB-F10.

Filter comparison:

Maxi Controller unloaded      7.44V
Maxi Controller with XPPF load   7.28V
Maxi Controller with XTB-F10     6.80V
Maxi Controller with XTB-F15     5.92V
Maxi Controller with XTB-F15+   6.60V
Maxi Controller with AF120      5.92V

Noise generator direct to line      .82V
Noise generator through XPPF   .00V
Noise generator through XTB-F10   .00V
Noise generator through XTB-F15   .00V
Noise generator through XTB-F15+   .00V
Noise generator through AF120   .01V

Maxi Controller direct to line      7.44V
Maxi Controller through XPPF     .00V
Maxi Controller through XTB-F10   .00V
Maxi Controller through XTB-F15   .00V
Maxi Controller through XTB-F15+   .00V
Maxi Controller through AF120   .03V

Measurements were made with the XTBM-Pro and each filter plugged into the powerstrip on my workbench.

Jeff

Logged
X-10 automation since the BSR days

JeffVolp

  • Moderator
  • Hero Member
  • *
  • Helpful Post Rating: 122
  • Posts: 2285
    • XTB Home Page
Re: High Current X10 Filter
« Reply #2 on: May 14, 2023, 06:37:57 PM »

A small batch of the best high current X10 filter is available now.
Logged
X-10 automation since the BSR days
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.