Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: cm15a automatically turns on lights when unplugged  (Read 14262 times)

omar

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 11
cm15a automatically turns on lights when unplugged
« on: April 13, 2005, 02:30:52 PM »
Hello, recently I unplugged my cm15a from
my computer and let it stand alone and
about 10 minutes after, some of my lights
turned on...note that i do not have any
timers setup on my system yet...what could
be going wrong?
Logged

martin

  • Sr. Member
  • ****
  • Helpful Post Rating: 2
  • Posts: 125
Re: cm15a automatically turns on lights when unplugged
« Reply #1 on: April 13, 2005, 03:18:18 PM »
That's odd. So CM15A detached from
computer's USB and plugged in an electrical
outlet then 10 minutes after some lights are
turning on. Were you able to reproduce this
behavior?
Logged

X10 Pro

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 1416
Re: cm15a automatically turns on lights when unplugged
« Reply #2 on: April 13, 2005, 03:27:35 PM »
Has this happened again? Do you have remote
controls or motion sensors that might have
been in use?
Logged

omar

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 11
Re: cm15a automatically turns on lights when unplugged
« Reply #3 on: April 13, 2005, 03:27:50 PM »
Yes, it happened a few weeks ago too when i
had a power glitch at home and my computer
turned off...batteries in the cm15a seem to
be working fine
Logged

omar

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 11
Re: cm15a automatically turns on lights when unplugged
« Reply #4 on: April 13, 2005, 03:39:03 PM »
No, there were no remote controls being
used and i have no motion sensors...and not
all the lights turned on, just a few
Logged

Observer

  • Guest
Re: cm15a automatically turns on lights when unplugged
« Reply #5 on: April 13, 2005, 03:53:26 PM »
The lights that turned on, were they defined
(referenced)within any macros?
Logged

Michael F

  • Guest
Re: cm15a automatically turns on lights when unplugged
« Reply #6 on: April 13, 2005, 05:52:36 PM »
No, they are not in any macro
Logged

donald mcmow

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 306
Re: cm15a automatically turns on lights when unplugged
« Reply #7 on: April 13, 2005, 06:44:04 PM »
What module addresses are being used?
Logged

Michael F

  • Guest
Re: cm15a automatically turns on lights when unplugged
« Reply #8 on: April 13, 2005, 06:48:54 PM »
a3 thru a8...although not all of them
turned on
Logged

X10 Pro

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 1416
Re: cm15a automatically turns on lights when unplugged
« Reply #9 on: April 13, 2005, 07:10:33 PM »
If you connect the interface to the PC, clear
the memory, then disconnect it, what happens?
Logged

me too

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 38
Re: cm15a automatically turns on lights when unplugged
« Reply #10 on: April 13, 2005, 10:48:07 PM »
Could one of your neighbors be using x10 on
the same house code?
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.