Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[marty k.]

I just recently install a phase
coupler/repeater and now I seem to be
receiving X10 commands from a neighbor's
alarm system (or something).

Here's just one Activity log entry...

05/20/2005 8:12:04 am - Receive -
StatusRequest

...and there's many, many more just like it
(2 or 3 per second).

Every so often I'll get an actual House
code/Unit code (like a B13 or J1) but for
the most part it's just StatusRequest.

The house code I'm using is "C" which seems
to be one of 4 house codes not used by the
neighbor's system.

If I turn on or off a light or appliance in
my system, it usually will silence the
StatusRequest for awhile.  Maybe an hour.

I know all this traffic can't be a good
thing.  My macros don't fire all the time.
Could this be why?

Should I install a whole house filter or
what?

Thanks for any replies.

Marty

[Brian H]

Completely different interfaces and
protocols. I also doubt that it will ever
happen. An early Inseton controller I saw
for sale had the ability to control a few
X10 addresses, but mostly does it's own
stuff. Different PLC frequency for the
powerline and different RF frequencies also.
AHP seems to have enough problems with it's
own equipment.

[carmine pacifico]

Now that’s a good joke,
X10 can’t event get AHP to work reliably
with their own products, let alone with a
more advanced protocol.

[marty k.]

Hey X10 Pro...

Any ideas?  Fixes?  Will the next update
address this?

Thanks,
Marty