Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[darren]

I'm having trouble with my PAT01. It works
fine on house code A, but I
cannot get it to work on any other code. Is
there a trick to switching
the code (reseting the house code)? When it
is on a different house
code (other than A) it will not respond to
any commands, including
polling. But, again, everything works fine
on A.

[Brian H]

The PAT01 is the same as the RR510 from X10.
It does One House Code set by the little
wheel on the front. So if your remotes and
modules are on A then set the wheel to A. If
you are doing a different house code reset
the dial to match the modules and remotes
house code. It can only do one house code at
a time. So if you are using A; C and D house
code modules and remotes and the dial is set
to D the A and C remotes and modules can not
be controlled by that unit. If it only works
with the code on A and all the others don't
work with a remote set to the code it maybe
broken.