Cannot record floodcam video with macro

[Tom D]

Hi there, I'm having a problem and hope
someone can help.

No matter what I try, I cannot get AH Pro
to record video from my floodcam using a
macro.

I created a new macro (Stored as C6)that
-Selects camera (my floodcam)C2
-Turns on my porch light D4
-Activates Chimer C2
-Starts video recording
-Waits 12 seconds
-Stops video recording
-Waits 3 minutes
Turns floodcam off

This macro will only work if I click
the "Run Macro" button from AH Pro or click
the button for C6 on from the PalmPad.  If
I walk in front of the floodcam - the
lights turn on, but no macro actions.  If I
set the macro to the same code as the
floodlight, it cycles on/off/on/off
continuously until AH Pro "encounters an
error and needs to close".

Any thoughts on what else I might try?

Thanks, really stuck on this.

TomD

[itch2scratch]

I have the same problem also, I was actually about to email them on information on how to achieve that task, but I looked in this forum first.... Do you have the smart macro?

I will check on this and see if I can find a way to work it, If not we will have to have them implement it on an update.

[X10 Pro]

I think we had noted this problem previously and have it in our list of things to fix. I'll double-check that, and if it's not already done we'll fix it for the next update.