Topic: edited marco won't fire (Read 3477 times)

Tuicemen · « **on:** March 14, 2005, 09:10:07 PM »

Ok maybe not a bug and I've never had this
happen as I always save to the interface
before I test or close AHP. but I just
tested and If you edit a macro and triy to
test it without saving it won't work.if you
exit with out saving it It still won't work
not even the previous version of the macro.
If you restart AHP it will propt you to
update the interface if you do you update
with your old version of the macro but at
least it will work! Could this be why many
people are having problems with macros?
Maybe a larger warning is needed!

X10 Pro · « **Reply #1 on:** March 15, 2005, 12:39:33 PM »

Tuicemen: Is the edited macro one that's
stored in the interface, or run from the PC?

carmine · « **Reply #2 on:** March 15, 2005, 04:41:48 PM »

When I make any changes , I clear the
interface memory before downloading. I
suspect the firmware is actually an
interpreter, that could expain why macros
and timer are unstable if I do not clear
the interface memory first.

Tuicemen · « **Reply #3 on:** March 15, 2005, 06:53:15 PM »

x10pro good question I deleted it as it was
only a test anyways. I always download to
the interface so I'm sure it was to run from
it. The post was more along the line that a
bigger spash screen should be used if there
is unsaved info in AHP.Or maybe there should
be an undo command as closing with out
saving seems to lock the cm15a.

News:

Author Topic: edited marco won't fire (Read 3477 times)

Tuicemen

edited marco won't fire

X10 Pro

Re: edited marco won't fire

carmine

Re: edited marco won't fire

Tuicemen

Re: edited marco won't fire