Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Infrared Lights for XCAMs  (Read 3709 times)

christopher glenn

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
Infrared Lights for XCAMs
« on: April 30, 2005, 01:03:33 PM »
I had read that all I needed was an IR light
to allow XCAMs to see in the dark.  Bought
one for $50--does nothing for the X10 wired
Nightcam.   What's the deal (I know the IR
light was working as I brought my video
camera in there to see it)?  Has anyone ever
got the XCAMs to work with an IR light?  I
guess there is some debate about IRs only
working with CCD cams and not with CMOS cams...
Logged

CG

  • Guest
Re: Infrared Lights for XCAMs
« Reply #1 on: May 05, 2005, 09:00:08 PM »
Hmmm...no replies?
Logged

Noel

  • Guest
Re: Infrared Lights for XCAMs
« Reply #2 on: May 09, 2005, 08:01:23 PM »
Hi Christopher, I never had any luck with
cmos cams and infrared. All of my CCD cams
will light up with the IR. Not sure if that
helps.
Logged

cj

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Infrared Lights for XCAMs
« Reply #3 on: May 13, 2005, 12:57:06 AM »
Christopher, the X-10 cameras do not
respond to infared. You can get a floodcam
or a remote switch controlled be motion
sensor to turn on lights but that is only
way to see at night. Even the low light cam
is worthless at night without a light
sourse other than infrared.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.