I HAVE THE VANGUARD SOFT WARE. ONE FLOOD
CAM ABOUT 60 FT FROM MY COMPUTER. TWO XCAM
MOUNTED ON A NINJA PAN & TILT KITS. ONE
ABOUT 15 FT FROM THE COMPUTER THE OTHER
ABOUT 30FT AWAY. I HAVE THE CM19A AND THE
VIDEO RECEIVER AWAY FROM THE COMPUTER SO
THERE IS NO ISSUE WITH INTERFERANCE. THE
TM751 IS PLACED WITHIN 2 FT FROM CM19A. AT
FIRST IT SEEMED TO BE A RF ISSUE BUT I PUT
A SCANNER ANTENNA FOR THE RIGHT 312 MHZ ON
MY CM19A IT IT GREATLY EXTENDED MY RANGE.
THE ONLY PROUBLEM I HAVE NOW IS WHEN MOTION
IS DETECTED ON ANY OF THE CAMERAS THE
PICTURE SOMETIMES DOES NOT CHANGE TO THE
RIGHT VIEWING SCREEN AND MOTION RING IN IN
THE LOWER RIGHT HAND SIDE DOES NOT ALWAYS
RESPOND. I HAVE THE SYSTEM SET TO RECORD
PICTURES AND TURN ON AN ADDRESS CHIME AND
EMAIL ME NOTIFICATION. SOME DAYS IT WORKS
AND SOME IT DOES NOT. I ALSO BOUGHT A SMART
REPEATER. THIS DOES NOT SEEM TO HELP. DID
ANYBODY EXPERIENCE THIS ISSUE? YOUR HELP
WOULD BE APPRECIATED BECAUSE X10 DOES NOT
REPLY TO MY E-MAILS FOR TECH SUPPORT.
THANKS
