Please login or register.

Login with username, password and session length

Author Topic: XCAM2 resolution question  (Read 4903 times)

pat

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
XCAM2 resolution question
« on: October 28, 2005, 05:57:57 PM »

Just a simple fill-in-the-blank type question.

Under bright daylight illumination you can
produce an image which will allow you the
read a car's license plate numbers at _______
feet.

I really can't get much farther away than
15-20 feet.

I've tried all the chanels and have the
antenna of each component correctly
positioned and located only 12 feet apart.

Logged

frowny

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 32
Re: XCAM2 resolution question
« Reply #1 on: November 04, 2005, 08:24:42 AM »

More than the simple fill-in-the-blank
answer...I have 8 x10 cameras, instant on,
older ones, and night watch.  None of them
will read any lettering smaller than the
size of the side of a tractor trailer.
Even when I carefully focus each camera,
they will not see a license plate at all,
not even the plate, not to mention the
lettering on the plates.  If that is what
you need, find a good CCD camera and avoid
x10.
Logged

SnotGeezer

  • Guest
Re: XCAM2 resolution question
« Reply #2 on: November 07, 2005, 01:24:46 PM »

i agree with frowny.  you can just sorta
make out wh at color and moel car goes by
with these toys.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.