Please login or register.

Login with username, password and session length

Author Topic: Multi-Wireless-Camera Sequencer?  (Read 2745 times)

ken kloman

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Multi-Wireless-Camera Sequencer?
« on: November 16, 2005, 08:16:39 AM »

I know that you can use the remote control
to switch between up to 4 cameras, but is
there a device that would do that for you?
I imagined that you could have up to 3
cameras (#1, 2, & 3) with the an "automatic
sequencer" as choice #4.  If you selected #4
it would rotate through the cameras, one at
a time, for you at some predetermined
interval.  If you saw something you wanted
to see more of, you would just select 1, 2,
or 3 on the remote to fix on that camera.
The sequencer would then be off, just like
all the other cameras are off when you
select one.  I have a situation that does
not allow for computer use.  Any ideas??
Logged

john m

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Re: Multi-Wireless-Camera Sequencer?
« Reply #1 on: November 22, 2005, 12:25:28 AM »

I thought the same - and spoke to a support
person today - what you can do is setup
multi motion detectors that will switch the
camera being recorded when motion triggers
the detector programmed to that camera -(see
setup instructions to program the detector)-
other than that - if there is another way to
do it - I would like to know also.
Logged

skootch

  • Guest
Re: Multi-Wireless-Camera Sequencer?
« Reply #2 on: December 03, 2005, 11:17:51 PM »

buy a quad!
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.